Combo sensor · moisture + density simultaneously
TriScan
Measures water content and density in one pass. Ideal for wood-based panel lines where both variables must be controlled. Density-independent moisture as an additional constant.
Specifications The numbers
The numbers
you need.
- Verfahren
- 2-PMR · Dual-Output
- Material
- Holzwerkstoffe, Brettschichtholz, Granulate
- Temperaturbereich
- 0 → +120 °C
- Genauigkeit Feuchte
- ±0,3 % H₂O
- Genauigkeit Dichte
- ±5 kg/m³
- Sample-Rate
- 100 Hz
- Schnittstellen
- OPC UA · Profibus · PROFINET
- Calibration
- PTB-traceable, beide Größen
Typical positions
Where TriScan works.
+ Particleboard · press inlet
+ OSB · forming machine
+ Glulam · before bonding
+ Wood briquettes · before press
FAQ
FAQ TriScan.
Why measure density too? +
In press and forming machines, density is a primary control parameter. TriScan provides both from the same sensor — no second installation point needed.
How decoupled are the measurements? +
Mathematically clean separation via the two resonance parameters. A change in density does not affect the moisture calculation — and vice versa.